You asked: Can you put higher wattage light bulb?

When it comes to replacing old incandescent bulbs with LEDs, a common question that customers ask is: “Can I use an LED bulb that has a higher wattage equivalent than my fixture allows?” The simple answer is yes, as long as the LED bulb uses less wattage than your fixture.

What happens if you put a higher wattage light bulb?

Installing light bulbs with wattage ratings that are higher than the fixture ratings does not necessarily damage the electrical circuit wires, nor is it likely to cause a circuit breaker to trip or cause other problems to the house wiring. The potential danger usually lies in the fixture itself.

Is it OK to put a 60W bulb in a 40W lamp?

Putting a 60W bulb in a 40W socket, probably won’t cause a problem, but you won’t get better brightness.

Can you put a 100 watt bulb in a 40 watt lamp?

A 40-watt-rated fixture can take only a 40-watt bulb. Any more and you will incur heat damage. That heat damage may be on the ceiling itself, the light fixture’s wiring or the house wiring in the ceiling. … Light fixtures are all designed with a maximum bulb rating, which is clearly marked on the fixture itself.

IT IS INTERESTING:  Can lamps cause fires?

What happens if you put a 60W LED bulb in a 40W socket?

Higher wattage alone doesn’t make the bulb burn out faster, but the rating partially has to do with heat/fire. For example, the fixture may only be designed to handle the heat of a 40W. Put in a 60W and the heat increases, there’s not enough ventilation, and the bulb prematurely fails due to the higher heat.

Can I put a 100W LED bulb in a 60W socket?

LED bulbs that deliver 800 lm are considered to have equal light output to standard 60W bulbs. … If your fixture is rated to accept 60 Watts, you can safely use 75W, 100W, or even 125W equal bulbs (which all draw less than 50 Watts of power) instead.

Can I put a 60W bulb in a 100W socket?

For a 60-Watt fixture, you could use a 100W, 125W, or even 150W LED equivalent because they all consume under 60-Watts! … That means you could use a 150W LED equivalent bulb in a 60W socket and get more than three times the brightness of your old 60-Watt incandescent bulb.

What is the equivalent of a 40 watt bulb in LED?

Compare wattage

Traditional bulb1 Halogen2 LED
40 watts 25 watts 5 watts
60 watts 40 watts 7 watts
75 watts 45 watts 9 watts
100 watts 60 watts 12 watts

What is a 100 watt bulb in LED?

Best color quality: GE Reveal 100W Replacement Bright Stik LED

Cree 100W Replacement LED GE 100W Replacement LED
Brightness (in lumens) 1,606 (1,650 claimed) 1,604 (1,600 claimed)
Energy usage (in watts) 16.5 15
Efficiency (lumens per watt) 97.3 106.9
Color temperature 2,700 K 2,700 K
IT IS INTERESTING:  You asked: Can leaving a flashlight on start a fire?

How many watts light bulb do I need?

Fixtures have a safety rating and one should not put in bulbs that exceed the labeled rating (such as “do not exceed 60 watts”). As long as you don’t put a bulb that uses more than 60 watts in that socket you will be fine.

What is LED equivalent to 60w?

LED equivalents to traditional incandescent light bulbs

Incandescent Light Bulb Wattage LED Equivalent Wattage
75 Watt 7.5 Watt
60 Watt 6 Watt
50 Watt 5 Watt
30 Watt 3 Watt

How many amps does a 100 watt LED light bulb use?

A 100 Watts bulb draws 0.90 Amps.

Can you put a 150 watt bulb in a 100 watt fixture?

A 100-watt bulb will draw more power through the wires than they safely can handle. (It is okay, however, to put a bulb with lower wattage in that fixture—drawing less than the wire’s maximum load isn’t a problem.) Some specialty lamps or other fixtures may have even lower watt ratings for other safety reasons.

What’s the difference between 40W and 60W?

So if a package for a lightbulb says the bulb uses 60 watts, or 60W, it means that that bulb will use 60 watts of electrical power. … A standard 40W bulb is equal to 400+ lumens, which represents the brightness of a bulb. Typically, the higher the wattage, the higher the lumens, and the more light output.

Spotlight