# How many spotlights do I need in my bathroom?

Contents

A bathroom has 3 zones, so you need IP44 fittings if installing lights over a bath, shower, for that size of room I say 3 or 4 led downlighters should be ample in that space, depend on quailty of fitting used, beam spread,etc.

## How many downlights do I need calculator?

A general rule of thumb for spacing your downlights is to take the height of your ceiling and divide by 2. For example, if your ceiling is 8 feet high, then your downlights should be around 4 feet apart from each other.

## How far apart should Spotlights be?

As a rule of thumb, we suggest you divide your ceiling height by 2 to give you the space required between each downlight. For example if your ceiling is 8 foot high, then position your lights 4 feet apart.

## Where should Spotlights be placed in a bathroom?

If you are planning a lighting scheme for a bathroom, for example, your starting point should be the locations requiring extra brightness, such as above the wash basin. Once the downlights for this area have been arranged, the remaining downlights can be added around them.

## What spotlights do I need for a bathroom?

A minimum of an IP44 rating is recommended for lighting installed in zones 2 and 3 of a bathroom, and IP65 and above is required for zone 1 regions near water sources.

## How many can lights for a 12×12 room?

A common rule of thumb is that you use one recessed light for every 4 to 6 square feet of ceiling space. Doing so provides even, overall illumination. In respect to this, how many can lights for a 12×12 room? The typical rule-of-thumb is 24″ from each wall, and then 3-5 feet between cans.

## How do I calculate LED lights for a room?

To determine the needed lumens, you will need to multiply your room square footage by your room foot-candle requirement. For example, a 100 square foot living room, which needs 10-20 foot-candles, will need 1,000-2,000 lumens.

## How many lights do I need in a room?

As a handy rule of thumb, a sitting room or bedroom will generally require around 10-20 lumens per square foot, while a bathroom or kitchen will need a stronger level of lighting, at around 70-80 lumens per square foot.

## How do you layout a ceiling light?

To determine how far apart to space your recessed lights, divide the height of the ceiling by two. If a room has an 8 foot ceiling, you should space your recessed lights approximately 4 feet apart. If the ceiling is 10 feet, you’ll want to put about 5 feet of space in between each fixture.

## Is recessed lighting outdated?

Recessed lighting will never go out of style. However, the finishes and sizes will vary and change as time goes by. There are too many advantages of having the lighting recessed for them to eventually go out of style or phase out.

IT IS INTERESTING:  Can I use a 250 watt bulb in a 150 watt lamp?

## What is the best lighting for bathrooms?

Chose bulbs or LED fixtures that emit light that is as close to white as possible—and be sure to chose bulbs with a high CRI (around 90-100) for the most accurate colors. Bulbs in the ‘soft white’ range of 2700K – 3000K are recommended for general bathroom use, and makeup application in particular.

## Can you put spotlights in a bathroom?

It is also often asked if you can have spotlights in a bathroom. Again, so long as you choose the correct IP rating for your bathroom zone, they are a great choice! Bathroom spotlights are often also referred to as downlights.

## Can you put a downlight above a shower?

Putting a bare batten holder directly over a shower with 2.4m ceilings and no RCD would be a massive no no! O.P. That said downlights are generally 12V (ELV) and separate ceiling fans are generally Class II (double insulated), and so would be permissible anyway.

## Are LED lights good for bathrooms?

LEDs: Light-emitting diode (LED) bulbs have become viable options for bathroom lighting. Like the others, a CRI of 90 or above and color temperature of 2700K to 3000K are recommended. Pay close attention to the brightness for LEDs, indicated in lumens.

## What does Zone 1 and 2 mean in bathroom lighting?

Zone 1 is the area above the bath or shower to a height of 2.25m from the floor. … It’s also worth noting that most shower lights are rated at IP65 in any case. Zone 2 is an area stretching 0.6m outside the perimeter of the bath and to a height of 2.25m from the floor.

IT IS INTERESTING:  What size bulb for can lights?

## Where is Zone 1 in a bathroom?

The space under the bath tub or shower basin is considered to be zone 1. However, if the space under the bath or shower basin is only accessible with a tool, it is considered to be outside the zones.