Reset the bulb by turning it off and on three times. There are two methods of resetting the bulb: 1) Reset once (off and on 3 times) to reach Easy Mode, which is the primary way to connect to the app. (In Easy Mode, you’ll see the bulb flashing quickly, 2x per second).
Why is my Geeni light not connecting?
Geeni bulb cannot connect to Wi-Fi network. Make sure you entered the correct Wi-Fi password during the Wi-Fi setup. Check whether there are any Internet connection problems. If the Wi-Fi signal is too weak, reset your Wi-Fi router and try again.
How do I get my smart light back online?
Reset Smart Home Devices
- Turn on the bulb for three-to-five seconds and then off for three-to-five seconds. Repeat this multiple times and turn it on again. If reset was successful, the bulb blinks.
- Turn off the bulb.
- Restart Discovery.
- Turn on the bulb.
How do I reconnect my Geeni light?
Power on the device and confirm that the light is blinking quickly. In the Geeni app, on the top right corner of the Devices screen, click (+) & select “Smart lighting”. Make sure the bulb is flashing quickly, indicating it’s ready to connect. If not, turn the bulb off and on 3 times until it is flashing quickly.
How do I reconnect my smart bulb?
Turn the bulb off for 2 seconds, then on for 2 seconds. Repeat three more times. After the fourth cycle, the bulb will flash, indicating that the reset was successful.
How do I get my Geeni back online?
If the app says “Device Offline” then: Please check your Wi-Fi router if online and in range. Check if you have the latest Geeni functionality by clicking “Check for firmware update” in your device settings. For better result, you are able to remove the device, restart the Geeni product and set up again.
How do I connect Geeni to New WIFI?
Download the Geeni app from App Store or Google Play.
- Register an account on your Geeni app & log in to the App. …
- Plug in the device & reset it.
- Open the Geeni app & add your device. …
- Enter your Wi-Fi network and password. …
- For backup AP mode. …
- Follow the instructions to choose the device from your Wi-Fi list. …
Why is my smart light bulb offline?
What does it mean if my bulb is status is “offline” or the bulb is flashing? A power outage or router service interruption disconnected the bulb from the network. While the bulbs do not need to have constant power, if the bulb does lose any power for a long duration of time, it might need a SOFT RESET.
How do I connect my smart light bulb to WIFI?
Step 1: Download and install the “Smart Life” App from Apple store or Google play store. Step 2: Install the smart bulb and turn on the switch to see the bulb flashing quickly, you can connect bulb to wifi (2.4GHz) according to the instructions. Step 3:⚠ If you have trouble with step 2 you can do AP mode.
Why is my smart plug not connecting?
The most likely cause of not being able to connect to the wifi with your smart plugs is the app that you’re using, and your phones settings. Ensuring that your Bluetooth, wifi and your location settings are on is the first step to fixing the problem.
How do you reset a Geeni switch?
Reset the outdoor plug by pressing and holding the button for 3 seconds until the indicator light is flashing rapidly. You can reset the Geeni Smart Outdoor Plug in two modes : 1) Reset one time (press and hold) to reach Easy mode (Fast blinking blue, 2x per second).
What is AP mode on smart bulb?
You can enable a direct Wi-Fi connection to allow direct communication between your scanner and computer or other devices without a wireless router or access point. The AP mode light is lit blue when an AP mode connection is established. …
How do you put Philips Hue bulbs in pairing mode?
In the Philips Hue Bluetooth just go to settings > voice assistants and open your bulb for pairing with your Google Home device. Just make sure your lamp has the latest firmware. Then switch to the Google Home app, which will automatically detect the bulb and follow the same steps for pairing.
How do I connect my smart plug to WIFI?
Change Smart Plug Wi-Fi Network
- Open C by GE app.
- Go to your Plug Device Details page by tapping on the device in the app.
- Tap edit (for iOS) or the three dots (for Android) in the top right corner.
- Select “Update Wi-Fi Network”
- Select new Wi-Fi network (you may be prompted to put in a password)
- Once Wi-Fi connects to your Smart Plug, you’re all set!