The ionized gases used in plasma emitting lighting are made up of noble gases. Noble gases make up a group of chemical elements with similar properties and under standard conditions they are odorless, colorless, monatomic gases.
Are LED lights Plasma?
The main difference being the use of the solid state device; LEP uses the device to generate RF energy which powers the plasma light source – LED uses the device itself for light generation. Some of the similarities include the directionality of the light output, component reliability, and control systems integration.
What is a plasma LED bulb?
Putco’s Plasma LED Bulbs are the brightest LEDs with super low power consumption. These high power LED’s provide a 50,000 hour-lifetime warranty and Putco’s lifetime guarantee. New flat LED technology utilizes the original lighting fixture of your vehicle and will not damage any part of your car’s lighting.
What is inside an LED light bulb?
In all, we counted 32 small discrete components made up of resistors, diodes and capacitors. Rounding out the board components were a bridge rectifier chip and three other power capacitors. The Philips LED bulb had no heat sink other than the two-sided plate holding the LEDs.
What is the difference between LED and COB LED?
The SMD LED light source is a single patch LED lamp bead with a light-emitting diode directly attached to the surface. COB LED light source packaging technology is a direct chip package on the board, COB has improved light efficiency, improved glare effect of LED lights, and reduced light loss.
How does a plasma light work?
The electrode at the center of a plasma ball emits a high-frequency, high-voltage alternating electric current. This current flows through the plasma filaments to create colorful tendrils of light. The colors depend upon the gases used inside the plasma ball. Common gases include neon, argon, xenon, and krypton.
How bright is plasma?
General characteristics. Plasma displays are bright (1,000 lux or higher for the display module), have a wide color gamut, and can be produced in fairly large sizes—up to 3.8 metres (150 in) diagonally. … (As plasma panels are locally lit and do not require a back light, blacks are blacker on plasma and grayer on LCD’s.)
Can plasma ball shock you?
Touching something metal (like the edge of the table) while touching the plasma ball can shock you. It’s not dangerous, but it can be startling. Leaving your hand on the sphere in one place for a long time generates heat.
Are plasma balls dangerous?
In general, plasma balls are very safe as long as you use them responsibly. A plasma ball is not any more dangerous than a standard lamp, so you don’t need to worry about it overheating or being dangerous for your kids to be around.
How can I make LED bulb?
How to make LED Bulb and required Material for making LED bulb
- Material for making LED bulb. …
- LED Driver circuit. …
- Assemble PCB components: …
- Mount the LED board on aluminum heatsink: …
- Mount the LED driver in Housing: …
- Add the input wire to the metal cup of the Driver circuit: …
- Crimp metal cup with housing:
16 июн. 2018 г.
What’s wrong with LED lights?
The AMA says that life-long exposure of the retina and lens to blue peaks from LEDs can increase the risk of cataract and age-related macular degeneration. Studies also reveal that light emitted by LEDs can cause retinal changes, if there is high exposure for even a short period of time.
Which is brighter cob or LED?
Better and Brighter Light Sources
The SMD LED lights produce between 50 to 100 lumens per watt and the COB LED lights produce 80 lumens per watt and above. This implies that more bright light is produced with less consumption of power and wattage which means LEDs make your homes brighter and better.
Which is better Cree or COB LED?
The CREE LED lighting system has a larger size and a PCB area that is wider than its COB counterpart. Both of the LEDs generate large quantities of heat when they are both being used. … By being wider and bigger, CREE can dissipate a higher volume of heat into its environment. This simply means that it is longer-lasting.
What is a chip on board LED?
Chip-on-Board or “COB” refers to the mounting of a bare LED chip in direct contact with a substrate (such as silicon carbide or sapphire) to produce LED arrays. (Source: SUMBULBS) LED technology is constantly being improved to improve performance, create more use cases, and make it more versatile.