Switching out incandescent light bulbs for LED bulbs is a great way to cut down on your monthly energy bills. But if you use dimmers in your home, you’re likely wondering: Do LED lights work on a dimmer? Well, the answer depends: Yes, LED lights work on a dimmer when: You have “dimmable” LED light bulbs.
Do you have to use a special dimmer switch for LED lights?
While most LED bulbs are now dimmable, not all of them are and not all of them dim in the same manner Since LEDs consume such a low wattage, many types of dimmers do not function with LED in the same way that they do with high wattage load incandescents.
Can you use a normal dimmer on LED lights?
A standard dimmer switch cannot be used with an LED light as you will never be able to dim the LED light either completely or not very well. LED lights need their own special electronic dimmer switch to have a fully functioning and dimming light.
What happens if you put a non dimmable LED bulb in a dimmer?
Some of the issues that may occur when a dimmer is incompatible with an LED lamp are: Flickering – Lamps will flicker (can also occur if a non-dimmable lamp is used) Drop-out – No light output at the end of the scale. … Damage or failure – LED driver, circuit or LED is damaged or fails.
What type of dimmer do I need for LED lights?
Generally speaking, you will be looking for either 600 watt max load or 1000 watt. When choosing dimmers for dimmable LEDs or CFLs, you should not load a dimmer higher than approximately 25% of the rated load for the dimmer.
Do I need an LED switch for LED lights?
Because of their circuitry, LEDs are not always compatible with traditional dimming switches. In some cases, the switch must be replaced. Other times, you’ll pay a little more for a compatible LED.
How many LED lights can you put on a dimmer?
A good rule of thumb is to allow 100W for each LED fixture so in this case, the 600W dimmer can handle only six LED fixtures. If you are meeting all of the electrical requirements of the dimmer and you are still having flicker issues, you can try adjusting the low-end trim.
Why do my LED lights flicker on a dimmer switch?
LED bulb flickering can be traced in almost every instance to a non-compatible dimmer switch in the lighting circuit. … LED bulbs don’t have glowing filaments. When the dimmer switch goes off and on many times per second, the LED bulb becomes a flickering strobe light.
What is an LED compatible dimmer?
Dimmer Switches work by reducing the power delivered to your light bulb. They do this by trimming a section of a waveform, either on the leading edge or trailing edge of the wave. … Manufacturers have designed their LED light bulbs to be compatible with the majority of common ‘trailing edge’ household dimmers.
How do I know if my LED lights are dimmable?
Look for an “LED” or “LED LAMP” marking on the bulb as well. Most residential LED light bulbs are dimmable, but some are not. In addition, the amount they can dim, or “dimming range”, also varies based on the light bulb used.
Is it OK to use dimmable bulbs without a dimmer?
The short answer to this question is: Yes, you can use dimmable LEDs without a dimmer switch, just like normal light bulbs. … This means that LED retailers can now offer dimmable LED bulbs at a comparable price to non-dimmable versions, so holding stock of non-dimmable LEDs is becoming unnecessary.
Can any light be dimmable?
Most light fixtures will work with standard dimmer switches, including those with halogen and incandescent lamps. LED fixtures, for instance, may work with standard dimmers, but some may need a specialized dimmer. … Likewise, not all compact fluorescent (CFL) light fixtures can be dimmed.
How do you dim LED lights without a dimmer?
How to Dim Lights Without a Dimmer
- Turn on the switch and it will shine at 100% capacity.
- Turn it off.
- Turn it on again and it will shine at 50% capacity.
- Turn it off again.
- Turn it on the third time and it will shine at 25% capacity.
- Turn it off again.
- Turn it on again and it will shine at its 100% capacity again.
Can you use a 120v dimmer switch for 12v?
Switches in both types of applications will have a rating that indicates what is the maximum value of voltage and current it can handle in AC and DC applications. … So, a 120v switch whether used in an AC or DC application can still be used to replace a 12v switch.
Are LED lights bad for your eyes?
The “blue light” in LED lighting can cause damage to the eye’s retina and also disturb natural sleep rhythms, according to a new report. … “Exposure to an intense and powerful (LED) light is ‘photo-toxic’ and can lead to irreversible loss of retinal cells and diminished sharpness of vision,” it said.
Which LED bulbs are best for dimmers?
Best dimmable: Philips 60W Equivalent Soft White A19 Dimmable LED Light Bulb. Best vintage-style: GreenSun LED Lighting 40W Vintage Edison Bulbs. Best CFL: GE CFL 15W Fluorescent 60W Replacement Light Bulb.