# How many LED lights do I need for my garage?

Contents

The Illuminating Engineering Society (IES) Lighting Handbook recommends 50 lumens (a measure of light output) per square foot in residential garages and 300 lumens per square foot in workshop areas.

## How much lighting do I need in my garage?

A general rule of thumb is to use 130 to 150 lumens per square foot of work space. For example, a 40-watt fluorescent bulb puts out about 2,200 lumens. A 60-watt incandescent bulb puts out about 800 lumens.

## How many lumens do I need for a 2 car garage?

The Illuminating Engineering Society (IES) guidelines recommend a minimum of 50 lumens per square feet of space. So the average one-car garage needs a minimum of 13,200 lumens while the a two-car garage requires a minimum of 20,000 lumens.

## How do you calculate how many LED lights do I need?

To determine the needed lumens, you will need to multiply your room square footage by your room foot-candle requirement. For example, a 100 square foot living room, which needs 10-20 foot-candles, will need 1,000-2,000 lumens. A 100 square foot dining room, which needs 30-40 foot-candles, will need 3,000-4,000 lumens.

## How far apart should led shop lights be?

I put a row of lights two feet out from the end wall and wrapped them around the corner. All my workbenches will be against these walls, so this will give me plenty of light. The rest of the lights (spaced in rows six feet apart) light up the rest of the shop beautifully.

## What type of lighting is best for a garage?

If you are looking for a typical garage look, LED shop lights are a great and practical choice —, providing sufficient brightness for a range of activities. Most shop lights hang directly from your garage ceiling on chains, so be sure to check your ceilings are high enough to avoid hitting your head!

## Is 3000 lumens too bright?

In other words, 3,000 lumens is meant to give a room a brighter light. This is not ideal if you have a small room and it’s a bedroom. You don’t want to blind your eyes when you’re about to go to bed. On the other hand, 2,000 lumens is ideal if you wish to light up a 200 square-foot living room.

## What is the best LED lights for a garage?

• Best Overall: hykolity Daylight 42W LED Light Fixture. …
• Best Budget: Barrina LED T5 Integrated Light Fixture. …
• Best Flush Mount: LEONLITE LED Wraparound Garage Light. …
• Best for Workbench: GE Basic 18-Inch Under Cabinet Fluorescent Light Fixture. …
• Best Industrial: Sunco Lighting Industrial LED Shop Light.

## What color temperature is best for garage lighting?

Color Temperature: Lights bulbs have three main color temperatures: soft white (2700K-3000K), bright white/cool white (3500K-4100K), and daylight (5000K-6500K). The higher the Kelvin, the whiter the color temperature is. In a garage, the ideal color temperature is between 4000K and 7000K.

IT IS INTERESTING:  Frequent question: Why should you not sleep with red LED lights on?

## How bright is 4500 lumens?

Dark Sky-Friendly Lights

Choose lamps that have a total visible light output of 4500 lumens or less. This is equivalent to about four 60-watt (or one 250 watt) incandescent bulbs. That’s a lot of light at night.

## Should I use 4 inch or 6 inch recessed lights?

Choose one that will accommodate the height of your ceiling or the size of your wall. 4-inch and 5-inch fixtures are great in kitchens for providing overhead countertop lighting. 6-inch fixtures are most common for general lighting purposes. 7- to 9-inch fixtures will create a wider wash of light.

## How many feet LED lights do I need?

A good quality LED strip should provide at least 450 lumens per foot (1500 lumens per meter), which provides approximately the same amount of light output per foot as a traditional T8 fluorescent lamp. (E.g. 4-ft T8 fluorescent = 4-ft of LED strip = 1800 lumens).

## How many LED lights can be on a 15 amp circuit?

Breaker Limitations

Each CFL or LED bulb typically gives the same amount of light as a 60-watt incandescent bulb while drawing 10 watts or less, which is equivalent to a current draw of 1/12 amp. Thus a 15-amp circuit can safely control 180 or more fixtures that use CFL or LED bulbs.

## How many LED lights can I put on a 20 amp circuit?

You can put up to 40 lights (based on 50 watt light) on a 20 amp breaker.

## How many LED shop lights can you connect together?

Up to 10 LED shop lights/garage lights can be linked together using the included butt connector or 5.25-foot interconnect cable. Separate 9.5- and 4.5-inch interconnect cables are also available (sold separately).

IT IS INTERESTING:  How do LED light up shoes work?

## How do you calculate light spacing?

Determine the number of lights that will be in each row and column. Divide the total length of the row by the total number of lights in the row to determine the spacing between lights. Divide the spacing between the lights by 2 to determine the distance between the wall and the first light.