Frequent question: How do you make a Led cob?

How are COB LEDs made?

Chip-on-Board or “COB” refers to the mounting of a bare LED chip in direct contact with a substrate (such as silicon carbide or sapphire) to produce LED arrays. COB LEDs have a number of advantages over older LED technologies, such as Surface Mounted Device (“SMD”) LEDs or Dual In-line Package (“DIP”) LEDs.

What is the difference between LED and COB LED?

The SMD LED light source is a single patch LED lamp bead with a light-emitting diode directly attached to the surface. COB LED light source packaging technology is a direct chip package on the board, COB has improved light efficiency, improved glare effect of LED lights, and reduced light loss.

What is an LED cob?

Relatively new to the LED market, chip on board (COB) LEDs offer many advantages over the standard options. COB LEDs are basically multiple LED chips (typically nine or more) bonded directly to a substrate by the manufacturer to form a single module.

Which is better cob or LED?

But the difference between LED light COB and SMD is that COB LEDs have more diodes. COB chips typically have 9 or more diodes. … Another aspect of the COB vs SMD LED Lights difference is in the use of energy. COB is known for better lumen-per-watt ratios and heat efficiency.

IT IS INTERESTING:  Why are my LED light bulbs burning out?

Which is better Cree or COB LED?

The CREE LED lighting system has a larger size and a PCB area that is wider than its COB counterpart. Both of the LEDs generate large quantities of heat when they are both being used. … By being wider and bigger, CREE can dissipate a higher volume of heat into its environment. This simply means that it is longer-lasting.

Why are COB LEDs better?

Advantages Of COB LED Chips

These are the biggest advantages of COB LEDs for growing: Higher light density: many small diodes in a tight space makes for a much higher light density, meaning you need less space to produce more light.

How long do COB LEDs last?

Even if the initial investment is higher, a quality LED fixture will last AT LEAST 30,000 hours. So it’ll pay itself off over time.

Which is better SMD or LED?

One of the biggest improvements is that SMD spotlights offer a higher lumen output for a lower energy consumption – making them more powerful and energy efficient than older LED lights. This is because they work on the principle that fewer and larger SMD LEDs produce a greater lumen output.

Is it cheaper to build LED grow light?

Even low-end factory-made LED grow lights could cost around $100. … As another bonus, making your own LEDs can be handy if you don’t have a ton of space. You’ll find it’s much easier to fit your DIY units in small spaces versus many of the LED grow lights now on the market.

How do you make a homemade grow light?

  1. Build the Wire Shelving Unit. Assemble the shelving unit according to manufacturer’s directions. …
  2. Choose Your Lights. Choose a grow light approximately the same width as the shelving unit. …
  3. Attach the Lights. Tie wire or chain to lights. …
  4. Set up a Timer. …
  5. Plant the Seeds. …
  6. Circulate Air Around the Plants.
IT IS INTERESTING:  What are the disadvantages of using LED lights?

What is the best LED grow light 2020?

Best LED Grow Lights for Cannabis 2021

  • Spider Farmer SF-4000 LED Grow Light.
  • MARS HYDRO TS 3000W LED Grow Light.
  • Electric Sky 300 V3 Wideband LED Grow Light.
  • HLG 550 V2 Quantum Board LED Grow Light.
  • MARS HYDRO TS 1000W LED Grow Light.
  • Spider Farmer SF-2000 LED Grow Light.
  • MARS HYDRO TSL 2000W LED Grow Light.

1 янв. 2021 г.

Are COB LED lights dimmable?

Dim-to-Warm is COB LED which works like halogen lamp when dimmed. Its specialty is that when you dim it the color temperature gets warmer. Usually dimming does not affect the color temperature of the LED. … It’s perfect for space where you want to have dimmed and warm toned atmospheric lighting.

How do you wire led cob?

Wiring LEDs in Series

  1. Take one of the leads from your LED driver (it doesn’t matter which polarity) and wire it to the corresponding input of your first COB (e.g. – positive lead to positive input OR negative to negative input).
  2. Take the other LED driver lead and wire it to the corresponding input on the last COB in the chain.

6 нояб. 2016 г.

Do COB LED need heatsink?

In the case of COB LEDs, it is possible to directly attach a COB LED to a heat sink (see Figure 2). As a result, COB LEDs do not require PCBs in order to install LEDs into a luminaire and the subsequent reflow process is no longer necessary.

Spotlight