We usually recommend two LED Parking lot lighting heads of 20,000 lumens each at about 15-20 feet high on each pole. Space the pole about 20 feet apart. That is average lighting.
How many lumens should outdoor lights be?
As for how many lumens you need for outdoor lighting, it ranges from 12-1300 depending on where they are. Path and step lights are best around 100 lumens, flood and motion sensor lights 700 lumens, underwater lights 200-400 lumens, wall lights 50-185 lumens, and general landscape lights 50-300 lumens.
Is 2200 lumens bright enough?
In a 100 percent light controlled room: 2000 lumens should be sufficient. In a room with some ambient light, but no direct lighting on the space you plan to project the image: 2000 to 2300 lumens should be sufficient. … In a room with bright ambient light: 2700 to 3200 lumens should be sufficient.
What kind of lights are used in parking lots?
Most parking lot lights utilize one of three types of lamps: high intensity discharge (HID) lamps such as metal halide, high pressure sodium, and – if they are very old – mercury vapor lamps.
How many foot candles do I need for a parking lot?
The horizontal luminance shall have an average maintained one foot-candle with a minimum level of 0.25 foot-candle on the parking lot surface from dusk until termination of normal business hours.
Is 3000 lumens bright enough?
In other words, 3,000 lumens is meant to give a room a brighter light. This is not ideal if you have a small room and it’s a bedroom. You don’t want to blind your eyes when you’re about to go to bed. On the other hand, 2,000 lumens is ideal if you wish to light up a 200 square-foot living room.
How Far Will 5000 lumens shine?
For the average space of 250 square feet, you’ll need roughly 5,000 lumens as your primary light source (20 lumens x 250 square feet).
Is 500 lumens bright enough for a security light?
If you have them for security reasons, more lumens will probably be necessary. … Flood lights require 700 to 1300 lumens. The brighter the lights are, the more lumens they emit, and the more secure your space. Motion sensor flood lights require between 300 and 700 lumens.
Should I use 4 inch or 6 inch recessed lights?
Choose one that will accommodate the height of your ceiling or the size of your wall. 4-inch and 5-inch fixtures are great in kitchens for providing overhead countertop lighting. 6-inch fixtures are most common for general lighting purposes. 7- to 9-inch fixtures will create a wider wash of light.
How many lumens does a bedroom need?
As a handy rule of thumb, a sitting room or bedroom will generally require around 10-20 lumens per square foot, while a bathroom or kitchen will need a stronger level of lighting, at around 70-80 lumens per square foot. To work out the lumens you need, simply multiply the square footage of the room by this figure.
What voltage are parking lot lights?
A 480 volt parking lot light is a high voltage parking light that works when parking lot lights are wired for such. Engineers use higher voltage because it lowers the amps needed (amps = watts/voltage) so higher the voltage the lower the amps.
How much does it cost to install parking lot lights?
The national average cost of installing outdoor lighting is between $2,000 and $4,500. At the low end, a project that only includes incandescent path and deck lights costs from $2,000 to $3,000. A high-end installation that also includes designer, motion and solar-power lights costs between $5,000 and $6,000.
How tall is a parking lot light?
Mounting height for parking lot lights can range from 12 ft. to 20 ft. but in some cases can reach as high as 35 ft.
How bright is 40 foot candles?
A 100 square foot dining room, which needs 30-40 foot-candles, will need 3,000-4,000 lumens. Maxim Lighting has provided you the rated lumen output under “Rated Lumens” on most products on the Web Site.
What is the minimum lighting required by OSHA?
The Minimum Illumination Required in Workplace Lighting Standards. General construction areas require a minimum of 5 foot-candles of illumination, and plants and shops require at least 10 foot-candles.
What does 5 foot candles mean?
Believe it or not, foot candles are the most common unit of measure used by lighting professionals to calculate light levels in businesses and outdoor spaces. In a nutshell, a foot candle is a measurement of light intensity and is defined as the illuminance on a one-square foot surface from a uniform source of light.