# Question: How many spot lights should be in a room?

Contents

A general rule of thumb for spacing your downlights is to take the height of your ceiling and divide by 2. For example, if your ceiling is 8 feet high, then your downlights should be around 4 feet apart from each other. It is important to consider that this is only a very general rule and should be used with caution.

## How many downlights do I need calculator?

Multiply width of room x length of room x 1.5 = amount of total minimum wattage needed (assuming an eight foot ceiling). Divide by 60 to get the number of 60-watt equivalent bulbs required. Then, add up the wattage in each bulb in each fixture to figure out how many light fixtures are needed.

## How many can lights for a 12×12 room?

A common rule of thumb is that you use one recessed light for every 4 to 6 square feet of ceiling space. Doing so provides even, overall illumination. Similarly, you may ask, how many can lights for a 12×12 room? The typical rule-of-thumb is 24″ from each wall, and then 3-5 feet between cans.

IT IS INTERESTING:  Why do you need a transformer for outdoor lighting?

## How far apart do you put LED downlights?

Generally when installing LED downlights, it is recommended to install lights 1m from the walls and space the lights between 1.2m and 1.5m apart. Positioning can alter depending on the amount of light required and the design of the room, which should be taken into consideration when planning lighting positioning.

## How far should Spotlights be from the wall?

Place the downlights about 16 inches to 24 inches apart and only about 6 inches to 12 inches set back off the wall. Downlights with narrow beam angles work best here.

## How do I calculate LED lights for a room?

To determine the needed lumens, you will need to multiply your room square footage by your room foot-candle requirement. For example, a 100 square foot living room, which needs 10-20 foot-candles, will need 1,000-2,000 lumens. A 100 square foot dining room, which needs 30-40 foot-candles, will need 3,000-4,000 lumens.

## Is one downlight enough for a bedroom?

A general rule of thumb you can go by is around 1 downlight per 1.4m2 of coverage at an average roof height for an adequate cover of light.

## Should I use 4 inch or 6 inch recessed lights?

Choose one that will accommodate the height of your ceiling or the size of your wall. 4-inch and 5-inch fixtures are great in kitchens for providing overhead countertop lighting. 6-inch fixtures are most common for general lighting purposes. 7- to 9-inch fixtures will create a wider wash of light.

## How many can lights for 15×15 room?

Measure your room to see how many fixtures you will need. A common rule of thumb is that you use one recessed light for every 4 to 6 square feet of ceiling space. Doing so provides even, overall illumination.

IT IS INTERESTING:  Are Night Angel Lights Safe?

## How do you layout can lights in a living room?

To determine how far apart to space your recessed lights, divide the height of the ceiling by two. If a room has an 8 foot ceiling, you should space your recessed lights approximately 4 feet apart. If the ceiling is 10 feet, you’ll want to put about 5 feet of space in between each fixture.

## How many LED lights can I run on one circuit?

Breaker Limitations

Each CFL or LED bulb typically gives the same amount of light as a 60-watt incandescent bulb while drawing 10 watts or less, which is equivalent to a current draw of 1/12 amp. Thus a 15-amp circuit can safely control 180 or more fixtures that use CFL or LED bulbs.

## Where should downlights be placed in a living room?

Position your recessed downlights approximately 2 feet away from the edge of your walls onto your ceilings as a starting point. Try to avoid creating any shadows. Then space your downlights evenly across the room for a balanced look.

## Should recessed lighting be symmetrical?

The General Lighting Layout

The purpose of general lighting is to provide even lighting throughout a room or area. The recessed lights should be aligned and equally spaced across the ceiling. Resist the temptation to place the lights according to objects in the room (such as furniture).

## Where should wall washing lights be placed?

Wall washing is typically produced by lights mounted at or above the ceiling that effectively wash up to 8-9 feet of vertical wall space. The wall-wash lights should be mounted at a sufficient distance from the wall so that light falls on the wall at a wider angle; in some spaces, 2.5-3 feet might be suitable.

IT IS INTERESTING:  How do you attach outdoor string lights to Brick?

## How do you illuminate a wall?

15 ideas to illuminate the walls of your home

1. ​Have clarity about what you want to illuminate. Save. Living Room. …
2. ​The warmth of yellow light. Save. cristina velani Request quote. …
3. ​Mysterious source of light. Save. …
4. ​Textured lighting. Save. …
5. ​Alternate lighting source. Save. …
6. ​Lighting the niches. Save. …
7. ​Artistically simple lamps. Save. …
8. ​Highlight to unravel the beauty. Save.

9 мар. 2017 г.

## How do you wash a wall with recessed lighting?

Always measuring to the center of the downlight, use 18″ – 36″ from wall as a general rule for placing wall wash downlights. Fixed trims should be placed closer to the wall, while adjustable trims may be placed farther away. Wall wash downlights should be spaced apart the same distance as the setback from the wall.