# How much light do I need in a living room?

Contents

As a handy rule of thumb, a sitting room or bedroom will generally require around 10-20 lumens per square foot, while a bathroom or kitchen will need a stronger level of lighting, at around 70-80 lumens per square foot. To work out the lumens you need, simply multiply the square footage of the room by this figure.

## How do you calculate the amount of light needed in a room?

Multiply width of room x length of room x 1.5 = amount of total minimum wattage needed (assuming an eight foot ceiling). Divide by 60 to get the number of 60-watt equivalent bulbs required. Then, add up the wattage in each bulb in each fixture to figure out how many light fixtures are needed.

## How many downlights do you need per room?

As a rule of thumb, we suggest you divide your ceiling height by 2 to give you the space required between each downlight. For example if your ceiling is 8 foot high, then position your lights 4 feet apart.

IT IS INTERESTING:  Quick Answer: How do I check my illuminate score?

## Which light is good for living room?

Soft white/warm white (2700 Kelvins): Best for bedrooms and living rooms; providing a traditional warm, cozy feel to them. Bright white/cool white (4100 Kelvins): Best in kitchens, bathrooms or garages; giving rooms a whiter, more energetic feel.

## Should I use 4 inch or 6 inch recessed lights?

Choose one that will accommodate the height of your ceiling or the size of your wall. 4-inch and 5-inch fixtures are great in kitchens for providing overhead countertop lighting. 6-inch fixtures are most common for general lighting purposes. 7- to 9-inch fixtures will create a wider wash of light.

## How do I calculate LED lights for a room?

To determine the needed lumens, you will need to multiply your room square footage by your room foot-candle requirement. For example, a 100 square foot living room, which needs 10-20 foot-candles, will need 1,000-2,000 lumens. A 100 square foot dining room, which needs 30-40 foot-candles, will need 3,000-4,000 lumens.

## Is one downlight enough for a bedroom?

A general rule of thumb you can go by is around 1 downlight per 1.4m2 of coverage at an average roof height for an adequate cover of light.

## Do you put downlights in bedrooms?

“In your bedroom, you’ll have your standard downlights or ceiling lights, but don’t just leave it at that,” Lauren urges. “Add something close to the bed on a bedside table – it could be a table lamp, a wall lamp or even pendants hanging on either side of the bed.”

## Are downlights expensive to run?

A typical halogen downlight will cost \$25 in electricity to run each year. In comparison an equivalent LED will cost \$3 in electricity to run each year. … LED lights are highly energy efficient and produce high quality light with little heat.

IT IS INTERESTING:  Your question: How can I light a room without lights?

## What color LED light is best for living room?

Warm white lighting fixtures are often preferred in living rooms and bedrooms to create a cozy atmosphere. The kelvin numbers offered for LED lights are typically 2700K and 3000K. These warm white lights are a good choice to compliment earthy tones and wood furniture.

## How do I pick a living room ceiling light?

To determine the height of a light fixture that’s best for your space:

1. Start with the height of the room (floor to ceiling) in feet. Example: 10 feet high.
2. Multiply the height by 2.5″ to 3″ per foot. …
3. Swap that value to inches (so 20 feet becomes 20 inches). …
4. This is the ideal height for a light fixture in this room.

## What color LED light is best for sleeping?

The answer is RED! How unexpected it is! Based on Hamsters research, red color light is the most conducive to sleep. At night red color light can significantly reduce people’s depressive symptoms compared with blue/white color light.

## How many can lights in a 20×20 room?

Beside above, how many can lights in a 20×20 room? If you have a center light fixture, you should be able to use the 4 4″ line voltage cans or low voltage for supplemental lighting. for a 20 foot room i would go with at least 8 three inch cans.

## How much area does a 6 inch recessed light cover?

A common rule of thumb is that you use one recessed light for every 4 to 6 square feet of ceiling space. Doing so provides even, overall illumination. This is an important rule to keep in mind when you are going to rely exclusively on recessed ceiling lights to illuminate your kitchen.

IT IS INTERESTING:  Quick Answer: What is the best type of outdoor flood light?

## How many can lights for a 12×12 room?

The typical rule-of-thumb is 24″ from each wall, and then 3-5 feet between cans. So in a 12′ room you’d probably want two rows of lights. Considering it is a bedroom and you don’t need it as bright as a kitchen, you can probably get away with 2 rows of 4 lights for a total of 8.